Schneider BMXDRA0805 Product Introduction

The Schneider BMXDRA0805 is a high-performance analog input module designed for industrial automation applications. It is part of the Modicon X80 series, known for its reliability and flexibility in harsh environments. This module is used to acquire analog signals from sensors and transducers, converting them into digital values for processing by PLCs or other control systems.

The BMXDRA0805 is widely used in industries such as manufacturing, energy, and water treatment, where precise analog signal acquisition is critical. Its robust design ensures stable performance even in electrically noisy environments.

Product Advantages

1. High Accuracy: Provides precise analog signal conversion with minimal error.

2. Wide Compatibility: Works seamlessly with Modicon X80 PLCs and other Schneider Electric components.

3. Robust Construction: Designed to withstand industrial environments with high immunity to noise and interference.

4. Easy Integration: Supports standard communication protocols for quick setup.

5. Flexible Configuration: Multiple input ranges and resolutions allow for versatile use.

6. Diagnostic Features: Built-in diagnostics for easy troubleshooting and maintenance.

Technical Parameters

Product Applications

The BMXDRA0805 is ideal for:

• Process Control: Monitoring pressure, temperature, and flow rates.

• Industrial Automation: Integrating with PLCs for machine control.

• Energy Management: Measuring current and voltage in power systems.

• Water Treatment: Monitoring pH levels, turbidity, and chemical dosing.

• HVAC Systems: Controlling temperature and humidity sensors.

Compatible Products

The BMXDRA0805 works with the following Schneider Electric components:

• PLCs: Modicon M340, Modicon X80 series.

• Power Supplies: BMX CPS 2000, BMX CPS 3000.

• Communication Modules: BMX NOM 0200, BMX NOE 0110.

• Backplanes: BMX BPX 0900, BMX BPX 1600.

Installation Instructions

1. Power Off: Ensure the system is powered down before installation.

2. Mounting: Secure the module on the DIN rail or backplane.

3. Wiring: Connect analog inputs using shielded cables for noise immunity.

4. Configuration: Use Schneider Electric software (EcoStruxure Control Expert) to set input ranges and resolution.

5. Testing: Verify signal acquisition and calibration before full operation.

Recommended Similar Models (Same Series)

Recommended Popular Schneider Models

FAQ (Q&A)

Q1: What is the maximum sampling rate of the BMXDRA0805?
A1: The maximum sampling rate is 1ms per channel.

Q2: Can the BMXDRA0805 handle both voltage and current inputs?
A2: Yes, it supports 0-10V, ±10V, 0-20mA, and 4-20mA inputs.

Q3: Is isolation provided between channels?
A3: Yes, it has channel-to-channel and channel-to-ground isolation.

Q4: What software is needed to configure the module?
A4: EcoStruxure Control Expert or similar Schneider Electric software.

Q5: What is the operating temperature range?
A5: -20°C to +60°C.

Q6: Can the resolution be adjusted?
A6: Yes, it can be configured for 12-bit or 16-bit resolution.