Product Introduction – HIMA F3112

The HIMA F3112 is a high-reliability digital output module used within HIMA’s renowned HIMax and HIQuad safety systems. It is designed specifically for applications requiring SIL 3 safety levels, according to IEC 61508 standards. The module features 16 digital outputs with galvanic isolation, suitable for critical industrial automation environments. Built to endure harsh conditions and demanding use cases, the F3112 ensures dependable operation in safety instrumented systems (SIS).

The module is widely employed in sectors such as oil & gas, petrochemical, power generation, and chemical processing where fail-safe digital output capabilities are crucial. The module’s fail-safe design and diagnostics allow it to detect faults and maintain operational integrity without compromising safety.

Its robust diagnostics capabilities, compatibility with HIMA engineering tools, and plug-and-play installation make the F3112 an integral component for modern safety control systems.

Product Advantages

• SIL 3 Certified: Compliant with IEC 61508 for use in high-integrity safety functions.

• High-Density Output: Offers 16 individually isolated digital outputs for compact systems.

• Fail-Safe Operation: Automatically drives outputs to a predefined safe state in case of failure.

• Robust Diagnostics: Includes fault detection for short circuit, wire break, and over-temperature.

• Hot Swappable: Can be replaced during operation without shutting down the system.

• Galvanic Isolation: Provides high resistance to interference between field and system levels.

• Wide Operating Range: Designed to function under severe industrial environmental conditions.

• Integrated Engineering Support: Easily configurable via HIMA’s ELOP II engineering tools.

Technical Specifications

Product Applications

• Emergency Shutdown Systems (ESD)

• Burner Management Systems (BMS)

• Turbomachinery Control

• Process Safety Systems

• Fire and Gas Systems

• Boiler Safety Applications

• Pipeline Monitoring and Control

• Redundant Safety Architectures in Power Plants

Compatible Modules and Accessories

The HIMA F3112 is designed to function within the HIMA HIMax and HIQuad safety system platforms. It is often used in combination with the following HIMA modules:

• CPU Modules: e.g., F8650E, F8640

• Input Modules: e.g., F3221, F3236

• Relay Modules: e.g., F7133, F7130

• Power Supply Modules: e.g., F7130A, F7506

• Terminal Blocks: e.g., H7630, H7631 for signal interfacing

All modules communicate over the HIMA internal backplane bus ensuring synchronized and deterministic behavior essential for safety functions.

Installation Instructions

1. Safety Precaution: Always ensure the system is in maintenance mode or powered down before installation, unless hot-swapping is supported.

2. Module Placement: Slide the module into the assigned slot on the HIMA rack unit, aligning with the backplane connector.

3. Fixation: Secure the module with the provided screws or locks to avoid vibrations during operation.

4. Wiring: Connect field wiring to the terminal blocks (e.g., H7630). Maintain polarity and wiring integrity according to the wiring diagram.

5. Diagnostics Check: After installation, use the HIMA engineering tool (ELOP II or SILworX) to verify module recognition and perform diagnostic self-checks.

6. Commissioning: Once validated, activate the module and monitor status LEDs for operational feedback (green for normal, red for fault).

7. Environmental Consideration: Ensure proper ventilation, and keep the ambient temperature within specified operating limits.

6 Related or Same-Series Models

8 Popular HIMA Models

FAQ – HIMA F3112

Q1: What is the main function of the HIMA F3112 module?
A1: The HIMA F3112 is a 16-channel digital output module designed for use in SIL 3-rated safety systems. It outputs fail-safe digital signals to field devices such as actuators or indicators.

Q2: Is the F3112 compatible with both HIMax and HIQuad systems?
A2: Yes, the F3112 is fully compatible with HIMA’s HIMax and HIQuad safety platforms and integrates seamlessly via the backplane.

Q3: Can the F3112 be hot-swapped during system operation?
A3: Yes, the F3112 supports hot-swapping, allowing users to replace or install the module without system shutdown, provided the rack and configuration support it.

Q4: What kind of diagnostics are built into the F3112?
A4: The module provides channel-specific diagnostics including detection of short circuits, wire breaks, and over-temperature conditions.

Q5: How is safety ensured if the module fails?
A5: The F3112 has a fail-safe design, automatically setting all outputs to a predefined safe state (typically OFF) in case of internal failure or fault detection.

Q6: How do I configure or program the F3112?
A6: Configuration and diagnostics are performed using HIMA’s ELOP II or SILworX software platforms, which allow graphical configuration, parameter setting, and real-time monitoring.